The wedge is the piece that complements the ridge, with application between the Lusa type tiles. This piece is essential to prevent the entry of rainwater and allow some air circulation. For more information, please contact our sales department.

The Cume Luso is the accessory that is applied to the meeting of the waters, usually called the Cumeeira. This accessory allows air to circulate.

Piece designed to join three ridges - which generally correspond to three waters - with one horizontal ridge and two sloping ridges. This crosspiece has three corners to cover (Macho). It also has a support in the center that can be complemented with a decorative piece.

This piece is designed to join three ridges - which generally correspond to three slopes - with one horizontal ridge and two sloping ridges. This crosspiece has one corner to receive and two to cover (Female). It also has a support in the center that can be complemented with a decorative piece.

It allows four ridges to be joined together, all of them sloping. All the corners of this cross are covered. There is a support in the center that can be complemented with a decorative piece.

This is the finishing piece of a ridge where there is insufficient space for a normal ridge.

These pieces are designed to replace normal ridges when the ridge or slopes are at an angle.

These pieces are designed to replace normal ridges when the ridge or slopes are at an angle.

This ridge is used if a ridge intersects another ridge in the middle. This ridge has two edges to cover (Male) and one to receive (Female). It is used to join ridges at 90º angles and at the same level.

This ridge is used if a ridge intersects another ridge in the middle. This ridge has two receiving edges (Female) and one covering edge (Male). It is used to join ridges at 90º angles and at the same level.

The Terminal Ridge Shell is the piece that completes the ridge and allows it to be effectively finished. It also ensures that the roof is watertight at the corners of the slopes.

The Terminal Guieiro is a piece identical to the Terminal Concha Ridge, but with only the front part. This accessory is placed at the end of the ridge to finish it off, replacing the Terminal Ridge Shell when there is not enough space to apply this accessory.

Replaces the Terminal Ridge Shell when the ridge ends at a 45º angle to the left.

Replaces the Terminal Ridge Shell when the ridge ends at a 45º angle to the right.

Esta es la pieza de acabado final de una cumbrera horizontal y los respectivos hastiales.