The wedge is the piece that complements the ridge, with application between the Lusa type tiles. This piece is essential to prevent the entry of rainwater and allow some air circulation. For more information, please contact our sales department.

The Cume Luso is the accessory that is applied to the meeting of the waters, usually called the Cumeeira. This accessory allows air to circulate.

Piece designed to join three ridges - which generally correspond to three waters - with one horizontal ridge and two sloping ridges. This crosspiece has three corners to cover (Macho). It also has a support in the center that can be complemented with a decorative piece.

This piece is designed to join three ridges - which generally correspond to three slopes - with one horizontal ridge and two sloping ridges. This crosspiece has one corner to receive and two to cover (Female). It also has a support in the center that can be complemented with a decorative piece.

It allows four ridges to be joined together, all of them sloping. All the corners of this cross are covered. There is a support in the center that can be complemented with a decorative piece.

This is the finishing piece of a ridge where there is insufficient space for a normal ridge.

These pieces are designed to replace normal ridges when the ridge or slopes are at an angle.

These pieces are designed to replace normal ridges when the ridge or slopes are at an angle.

This ridge is used if a ridge intersects another ridge in the middle. This ridge has two edges to cover (Male) and one to receive (Female). It is used to join ridges at 90º angles and at the same level.

This ridge is used if a ridge intersects another ridge in the middle. This ridge has two receiving edges (Female) and one covering edge (Male). It is used to join ridges at 90º angles and at the same level.

This is the final piece of a horizontal ridge that ends in two slopes (gables or slopes). This piece has three edges covering the ridges (Machos), both the horizontal one and the two on the gables.

This is the final piece of a horizontal ridge that ends in two slopes (gables or overhangs). This piece has a horizontal edge that receives (Female) and two edges that cover the tops of the gables (Male).

The Terminal Ridge Shell is the piece that completes the ridge and allows it to be effectively finished. It also ensures that the roof is watertight at the corners of the slopes.

The Terminal Guieiro is a piece identical to the Terminal Concha Ridge, but with only the front part. This accessory is placed at the end of the ridge to finish it off, replacing the Terminal Ridge Shell when there is not enough space to apply this accessory.

Replaces the Terminal Ridge Shell when the ridge ends at a 45º angle to the left.

Replaces the Terminal Ridge Shell when the ridge ends at a 45º angle to the right.

The eaves should have a slope between 8 and 10%, to allow easy drainage of rainwater.

The eaves should have a slope of between 8 and 10% to allow rainwater to drain easily.

The eaves must have a slope of between 8 and 10% to allow rainwater to drain easily.

The eaves should have a slope of between 8 and 10% to allow rainwater to drain easily.

Este accesorio consiste en una tapa y un canalón, con los cuales se forman los aleros colocando la Teja Globo

The Eave End Special helps in the application of the eaves, leaving the gutters with the correct distance between them, eliminating the need to use excess mortar.

The 2-piece Globe Corner, as its name suggests, is made up of two pieces. It is especially recommended for complementing eaves when they are made with Globe Tiles.

The 60 Eaves Corner consists of 11 pieces: 6 gutters and 5 covers. Recommended as a complement to the 60 Eaves, it can also be used with the Special Eaves.

The 80 Eaves Corner consists of 15 pieces: 8 gutters and 7 covers. This product complements the 80 Eaves Corner.

The 110 Eaves Corner consists of 15 pieces: 9 gutters and 8 covers. This product complements the 100 and 120 eaves.

This corner consists of two base pieces - right and left - a tie and four covers. It is recommended for application with the Special Eaves. This is the piece that receives the ridge which will be finished off by a Shell Terminal, which will sit on the back of the corner, covering it.

Applied to inverted corners, the recessed corner allows for greater side coverings than the re-entrant corner. This corner is made up of 9 gutters and 8 covers, and can be used to complement an eaves built with Special Eaves, or with 60 and 80 Eaves.

Applied to inverted corners, the recessed corner allows for greater side coverings than the re-entrant corner. This corner consists of 9 gutters and 8 covers, and can be complemented with 100 and 120 eaves.

Este accesorio es ideal para situaciones donde hay esquinas invertidas. Esta esquina se compone de 5 piezas, y puede servir como complemento de un alero construido con Alero Especial, o con el Alero de 60 cm. Para más información, contacte con nuestro departamento comercial.

Esta es la pieza de acabado final de una cumbrera horizontal y los respectivos hastiales.

The ventilation walkway tile has the function of ensuring ventilation of roofs (between the tiles and the ceiling or between the tiles and the roof that supports them), as well as facilitating access to tiled roofs. This part is essential for preventing the appearance of fungus, condensation and tile peeling.

Tile with a hole in the center where the chimney pipe sits.