The eaves should have a slope between 8 and 10%, to allow easy drainage of rainwater.

The eaves should have a slope of between 8 and 10% to allow rainwater to drain easily.

The eaves must have a slope of between 8 and 10% to allow rainwater to drain easily.

The eaves should have a slope of between 8 and 10% to allow rainwater to drain easily.

Este accesorio consiste en una tapa y un canalón, con los cuales se forman los aleros colocando la Teja Globo

The Eave End Special helps in the application of the eaves, leaving the gutters with the correct distance between them, eliminating the need to use excess mortar.

The 60 Eaves Corner consists of 11 pieces: 6 gutters and 5 covers. Recommended as a complement to the 60 Eaves, it can also be used with the Special Eaves.

The 80 Eaves Corner consists of 15 pieces: 8 gutters and 7 covers. This product complements the 80 Eaves Corner.

The 110 Eaves Corner consists of 15 pieces: 9 gutters and 8 covers. This product complements the 100 and 120 eaves.

This corner consists of two base pieces - right and left - a tie and four covers. It is recommended for application with the Special Eaves. This is the piece that receives the ridge which will be finished off by a Shell Terminal, which will sit on the back of the corner, covering it.

Applied to inverted corners, the recessed corner allows for greater side coverings than the re-entrant corner. This corner is made up of 9 gutters and 8 covers, and can be used to complement an eaves built with Special Eaves, or with 60 and 80 Eaves.

Applied to inverted corners, the recessed corner allows for greater side coverings than the re-entrant corner. This corner consists of 9 gutters and 8 covers, and can be complemented with 100 and 120 eaves.

Este accesorio es ideal para situaciones donde hay esquinas invertidas. Esta esquina se compone de 5 piezas, y puede servir como complemento de un alero construido con Alero Especial, o con el Alero de 60 cm. Para más información, contacte con nuestro departamento comercial.