The wedge is the piece that complements the ridge, with application between the Lusa type tiles. This piece is essential to prevent the entry of rainwater and allow some air circulation. For more information, please contact our sales department.

The new Seculum ventilation tile, designed to ensure efficient ventilation on roofs, without the “mat” feature. This new feature is the ideal choice for those who value a more discreet solution, ensuring essential ventilation and, at the same time, improving the aesthetics of the roof, according to the preferences of each project.

The Cume Luso is the accessory that is applied to the meeting of the waters, usually called the Cumeeira. This accessory allows air to circulate.

The Universal Ridge is the accessory that is applied to the meeting of the waters, usually called the Ridge. This accessory allows air to circulate. The Universal Ridge can also be used as a gable end due to its shape.

Piece designed to join three ridges - which generally correspond to three waters - with one horizontal ridge and two sloping ridges. This crosspiece has three corners to cover (Macho). It also has a support in the center that can be complemented with a decorative piece.

This piece is designed to join three ridges - which generally correspond to three slopes - with one horizontal ridge and two sloping ridges. This crosspiece has one corner to receive and two to cover (Female). It also has a support in the center that can be complemented with a decorative piece.

It allows four ridges to be joined together, all of them sloping. All the corners of this cross are covered. There is a support in the center that can be complemented with a decorative piece.

This is the finishing piece of a ridge where there is insufficient space for a normal ridge.

These pieces are designed to replace normal ridges when the ridge or slopes are at an angle.

These pieces are designed to replace normal ridges when the ridge or slopes are at an angle.

This ridge is used if a ridge intersects another ridge in the middle. This ridge has two edges to cover (Male) and one to receive (Female). It is used to join ridges at 90º angles and at the same level.

This ridge is used if a ridge intersects another ridge in the middle. This ridge has two receiving edges (Female) and one covering edge (Male). It is used to join ridges at 90º angles and at the same level.

The Terminal Ridge Shell is the piece that completes the ridge and allows it to be effectively finished. It also ensures that the roof is watertight at the corners of the slopes.

The Terminal Guieiro is a piece identical to the Terminal Concha Ridge, but with only the front part. This accessory is placed at the end of the ridge to finish it off, replacing the Terminal Ridge Shell when there is not enough space to apply this accessory.

Replaces the Terminal Ridge Shell when the ridge ends at a 45º angle to the right.

Replaces the Terminal Ridge Shell when the ridge ends at a 45º angle to the left.

The eaves should have a slope of between 8 and 10% to allow rainwater to drain easily.

The eaves must have a slope of between 8 and 10% to allow rainwater to drain easily.

The eaves should have a slope of between 8 and 10% to facilitate the evacuation of r ainwater.

The eaves should have a slope between 8 and 10%, to allow easy drainage of rainwater.

This accessory consists of a cover and guttering, with which the eaves are formed by fitting them to the Atlas roof tile.

The Special Eaves Finisher helps in the application of the eaves, leaving the gutters at the correct distance from each other, eliminating the need to use excess mortar.

The 3-piece Seculum Corner, as its name suggests, is made up of three pieces. It is especially recommended for complementing eaves when they are made with Seculum tiles. This corner consists of two base pieces - right and left - and a tie.

The Eaves Corner 60 is composed of 11 pieces: 6 gutters and 5 layers. Recommended to complement the Eaves 60, it can also be used as a Special Eaves.

The Corner Eave 80 consists of 15 pieces: 8 gutters and 7 covers. This product complements the Corner Eave 80.The Corner Eave 80 consists of 15 pieces: 8 gutters and 7 covers. This product complements the Eaves 80.

The Eave corner 110 is composed of 17 pieces: 9 gutters and 8 layers. This product is complementary to the Eaves of 100 and 120.

The Seculum Eaves Corner consists of three pieces: a right-hand piece, a left-hand piece and a tie or joint between the other two. It is especially recommended for complementing eaves when they are made with Seculum tiles.

Applied to inverted corners, the retreating corner allows for greater side coverings than the re-entrant corner. This corner consists of 9 gutters and 8 covers, and can be used to complement an eave built with Special Eaves, or with Eaves 60 and 80.

Applied on inverted corners, the recessed corner allows for greater lateral coverage than the recessed corner. This corner consists of 9 gutters and 8 layers, and can be used as a complement with 100 and 120 eaves.

This accessory is ideal for situations where there are inverted corners. This corner is made up of 5 pieces and can be used to complement an eaves built with the Special Eaves or the 60 cm Eaves.

This is the final finishing piece of a horizontal ridge and its gables.

This accessory has two corners at the ends and a tab in the middle. It is used to finish off the rows of tiles next to the gable.

The ventilated walkway tile has the function of ensuring ventilation of roofs (between the tiles and the ceiling or between the tiles and the roof that supports them), as well as facilitating access to tiled roofs. This part is essential for preventing the appearance of fungus, condensation and tile peeling.

Tile with a hole in the center for the chimney pipe.