The Cume Luso is the accessory that is applied to the meeting of the waters, usually called the Cumeeira. This accessory allows air to circulate.

The Universal Ridge is the accessory that is applied to the meeting of the waters, usually called the Ridge. This accessory allows air to circulate. The Universal Ridge can also be used as a gable end due to its shape.

Piece designed to join three ridges - which generally correspond to three waters - with one horizontal ridge and two sloping ridges. This crosspiece has three corners to cover (Macho). It also has a support in the center that can be complemented with a decorative piece.

This piece is designed to join three ridges - which generally correspond to three slopes - with one horizontal ridge and two sloping ridges. This crosspiece has one corner to receive and two to cover (Female). It also has a support in the center that can be complemented with a decorative piece.

It allows four ridges to be joined together, all of them sloping. All the corners of this cross are covered. There is a support in the center that can be complemented with a decorative piece.

This allows four ridges to be joined together, all of them sloping. All the corners are covered. There is a support in the center that can be complemented with a decorative piece.

Es la pieza final de una cumbrera horizontal que termina en dos vertientes (hastiales o voladizos). Esta pieza tiene un borde horizontal que recibe (Hembra) y dos bordes que cubren los remates de los hastiales (Macho).

The Meridian Terminal Ridge is the piece that completes the ridge and allows it to be effectively finished. It also ensures that the roof is watertight at the corners of the slopes.

The eaves should have a slope of between 8 and 10% to allow rainwater to drain easily.

The eaves must have a slope of between 8 and 10% to allow rainwater to drain easily.

The eaves should have a slope of between 8 and 10% to facilitate the evacuation of r ainwater.

The eaves should have a slope between 8 and 10%, to allow easy drainage of rainwater.

The Tropic Eaves Trim makes it easier to lay the tiles under the eaves without the need for mortar. It also helps to keep the eaves covers at the correct distance from each other.

The Eaves Corner 60 is composed of 11 pieces: 6 gutters and 5 layers. Recommended to complement the Eaves 60, it can also be used as a Special Eaves.

The Corner Eave 80 consists of 15 pieces: 8 gutters and 7 covers. This product complements the Corner Eave 80.The Corner Eave 80 consists of 15 pieces: 8 gutters and 7 covers. This product complements the Eaves 80.

The Eave corner 110 is composed of 15 pieces: 9 gutters and 8 layers. This product is complementary to the Eaves of 100 and 120.

Applied to inverted corners, the retreating corner allows for greater side coverings than the re-entrant corner. This corner consists of 9 gutters and 8 covers, and can be used to complement an eave built with Special Eaves, or with Eaves 60 and 80.

Applied on inverted corners, the recessed corner allows for greater lateral coverage than the recessed corner. This corner consists of 9 gutters and 8 layers, and can be used as a complement with 100 and 120 eaves.

This is the final finishing piece of a horizontal ridge and its gables.

The ventilated walkway tile has the function of ensuring ventilation of roofs (between the tiles and the ceiling or between the tiles and the roof that supports them), as well as facilitating access to tiled roofs. This part is essential for preventing the appearance of fungus, condensation and tile peeling.

Tile with a hole in the center (diameter: 90 mm) into which the chimney pipe sits. Pipe diameter (inside): 120 mm | Pipe diameter (outside): 140 mm;

0.2 Kg