The eaves should have a slope of between 8 and 10% to allow rainwater to drain easily.

The Cume is the accessory that is applied to the meeting of the waters, usually called the Cumeeira. This accessory allows air to circulate.

This piece is designed to join three ridges - which generally correspond to three slopes - with one horizontal ridge and two sloping ridges. This crosspiece has one corner to receive and two to cover (Female). It also has a support in the center that can be complemented with a decorative piece.

Piece designed to join three ridges - which generally correspond to three waters - with one horizontal ridge and two sloping ridges. This crosspiece has three corners to cover (Macho). It also has a support in the center that can be complemented with a decorative piece.

The eaves must have a slope of between 8 and 10% to allow rainwater to drain easily.

The eaves should have a slope of between 8 and 10% to facilitate the evacuation of rainwater.

The eaves should have a slope between 8 and 10%, to allow easy drainage of rainwater.

The Eaves Corner 60 is composed of 11 pieces: 6 gutters and 5 layers. Recommended to complement the Eaves 60, it can also be used as a Special Eaves.

The Corner Eave 80 consists of 15 pieces: 8 gutters and 7 covers. This product complements the Corner Eave 80.The Corner Eave 80 consists of 15 pieces: 8 gutters and 7 covers. This product complements the Eaves 80.

The Eave corner 110 is composed of 15 pieces: 9 gutters and 8 layers. This product is complementary to the Eaves of 100 and 120.

Applied to inverted corners, the retreating corner allows for greater side coverings than the re-entrant corner. This corner consists of 9 gutters and 8 covers, and can be used to complement an eave built with Special Eaves, or with Eaves 60 and 80.