The Marseille Ridge is the accessory that is applied to the meeting of the waters, usually called the Ridge. This accessory allows air to circulate.

Piece designed to join three ridges - which generally correspond to three waters - with one horizontal ridge and two sloping ridges. This crosspiece has three corners to cover (Macho). It also has a support in the center that can be complemented with a decorative piece.

This piece is designed to join three ridges - which generally correspond to three slopes - with one horizontal ridge and two sloping ridges. This crosspiece has one corner to receive and two to cover (Female). It also has a support in the center that can be complemented with a decorative piece.

It allows four ridges to be joined together, all of them sloping. All the corners of this cross are covered. There is a support in the center that can be complemented with a decorative piece.

It allows four ridges to be joined together, all of them sloping. All the corners of this cross are covered. There is a support in the center that can be complemented with a decorative piece.

This is the final piece of a horizontal ridge that ends in two slopes (gables or overhangs). This piece has a horizontal edge that receives (Female) and two edges that cover the tops of the gables (Male).

The Meridian Terminal Ridge is the piece that completes the ridge and allows it to be effectively finished. It also ensures that the roof is watertight at the corners of the slopes.

The eaves should have a slope of between 8 and 10% to allow rainwater to drain easily.

The eaves must have a slope of between 8 and 10% to allow rainwater to drain easily.

The Angled Gable End is the accessory that is applied to the meeting of the waters, generally known as the Ridge. This accessory allows air to circulate. The Universal Ridge can also be used as a gable end due to its shape.

The eaves should have a slope of between 8 and 10% to facilitate the evacuation of r ainwater.

The eaves should have a slope between 8 and 10%, to allow easy drainage of rainwater.

The Eaves Corner 60 is composed of 11 pieces: 6 gutters and 5 layers. Recommended to complement the Eaves 60, it can also be used as a Special Eaves.

The Corner Eave 80 consists of 15 pieces: 8 gutters and 7 covers. This product complements the Corner Eave 80.The Corner Eave 80 consists of 15 pieces: 8 gutters and 7 covers. This product complements the Eaves 80.

The Eave corner 110 is composed of 15 pieces: 9 gutters and 8 layers. This product is complementary to the Eaves of 100 and 120.

Applied to inverted corners, the retreating corner allows for greater side coverings than the re-entrant corner. This corner consists of 9 gutters and 8 covers, and can be used to complement an eave built with Special Eaves, or with Eaves 60 and 80.

Applied on inverted corners, the recessed corner allows for greater lateral coverage than the recessed corner. This corner consists of 9 gutters and 8 layers, and can be used as a complement with 100 and 120 eaves.

Meridian Eaves Trim makes it easier to lay the tiles under the eaves without the need for mortar. It also helps to keep the eaves covers at the correct distance from each other.

Finishing piece for a roof where there is not enough space for a Marseille tile.

Finishing tile on the side of a Marseille tile roof, for the application of the right gable end.

Side finishing tile of a Marseille tile roof, for the application of the Left Gable End.

This accessory is placed between the tile or the piece with which the roof ends, covering the upper side of the gable and preventing water or humidity from entering through the angle of the gable. This piece is applied to the gable, serving as a finishing touch to the face of the wall on the right-hand side.

This accessory is placed between the tile or the piece with which the roof ends, covering the upper side of the gable and preventing water or humidity from entering through the angle of the gable. This piece is applied to the gable, serving as a finish to the face of the wall on the left-hand side.

This is the final finishing piece of a horizontal ridge and its gables.

The ventilated walkway tile has the function of ensuring ventilation of roofs (between the tiles and the ceiling or between the tiles and the roof that supports them), as well as facilitating access to tiled roofs. This part is essential for preventing the appearance of fungus, condensation and tile peeling.

Tile with a hole in the center (diameter: 90 mm) into which the chimney pipe sits. Pipe diameter (inside): 120 mm | Pipe diameter (outside): 140 mm;

Tile with a hole in the center (Diameter: 120 mm) into which the chimney pipe sits. Pipe diameter (inside): 140 mm | Pipe diameter (outside): 160 mm;